ABT2010

Precision Deinterlacing™

• Supports 480i/576i/1080i-50/1080i-60
• Arbitrary cadence detection (any-to-any) to detect non-standard cadences
• Five-field motion adaptive deinterlacing
• Edge-adaptive processing to produce smooth diagonal edges
• Three-frame video processing with low-latency gaming modes
• Reliable 2:2 pull-down detection for 50-Hz video standards
• Bad edit detection to minimize artifacts caused by sequence breaks in film content
• Detection of multiple source type within a frame - for example, video titles over film
• Detection of 2:2 to/from 3:2 crossfades and out of phase 3:2 crossfades
• Detection modes - automatic, video, film-bias, forced 3:2 and 2:2
• Cadence detection of 480p, 576p, 720p, and 1080p sources

Single-Chip SD/HD Video Processor

• Anchor Bay's award-winning vertical and horizontal up and down scaler
• Accepts SD, HD, and PC inputs including 1080p
• Up-scales to 1080p and downscales to 480i format
• Automatic chroma upsampling error detection and correction
• Panoramic stretch mode to support 4:3 content on a 16:9 display
• Tearless frame rate conversion
• Full aspect ratio control
• Supports multiple input aspect ratios
• Supports multiple display aspect ratios
• Zoom, pan, and border functions

PReP

• Industry's first technology to restore progressive video signals to their original interlaced formats and then converts the interlaced signal to progressive format using Precision Deinterlacing.
• Processes formats including 480p, 576p, 1080p/50, and 1080p/60
• Internal software function will automatically disable PReP when receiving a 720p signal, which cannot be restored to an interlaced signal
• Users may choose to disable PReP manually for all formats
• Utilizes Precision Deinterlacing to eliminate artifacts

MPEG Noise Reduction

• Mosquito noise reduction for SD/HD formats
• General noise reduction including block noise for SD/HD formats

Picture Enhancement

• Detail enhancement to increase fine detail or reduce noise for overly enhanced images
• Edge enhancement to sharpen edges or to reduce overly enhanced edges

Picture Controls

• Brightness, contrast, saturation, hue, sub-pixel YC delays
• Output black level controls
• Gamma
• Calibration controls including 3 x 3 matrix

On-Screen Display (OSD)

• Character-based OSD supports transparency with foreground/ background color
• 256/128-character set with 12 x 24/24 x 24 characters
• 128 x 32 character map which can be freely positioned anywhere on the screen

Controls and Clocks

• I2C- compatible serial interface
• Anchor Bay Serial™ interface - four-wire fast serial interface of up to 10.0 MHz
• Integrated PLLs

Memory

• DDR2 SDRAM
• 256 Mbit (16Mx16)
• Larger sizes will be supported (512 Mbit, 1024 Mbit)
• Flexible memory interface
• 1 device - SD deinterlacing
• 2 devices - HD deinterlacing

Test Pattern Generator

• Flexible test pattern generator under software control to provide reference test patterns for calibrating display.

Audio Delay

• 10-channel I2S audio support (HDMI 1.3)
• Supports up to 640 ms of audio delay
• Multiple formats including multi-channel audio (compressed, PCM)

Package

• 316-PBGA (27 mm x 27 mm)

Power / Voltage

• Less than 2.5 W (no heat sink)
• 1.0-V Core, 3.3-V I/O, 1.8-V Memory

AVAILABILITY

• Sampling Q2 2007

Inputs

• 30-bit 4:4:4 RGB/YCbCr or 20-bit YCbCr
• Video Formats: 480i/576i/480p/576p/720p/1080i/ 1080p (including 1080p/24sF)
• PC Formats: VGA through SXGA
• Separate and embedded sync including DE generation (including BT.656)

Output

• 24/30/36-bit 4:4:4 RGB/YCbCr or 20-bit/24-bit YCbCr
• Video Formats: 480i/576i/480p/576p/720p/1080i/1080p (including 1080p/24sF)
• PC Formats: VGA through SXGA
• Separate and embedded syncs (including BT.656)