Toll-Free:866-423-3836
Phone: 408-429-6300
Orders: semiconductorsales@anchorbaytech.com

ABT1015
![]()
The ABT1015 is Anchor Bay Technologies' third generation standard-definition (SD) and high-definition (HD) single-chip video scaling solution targeted at HDMI 1.3 DVD player/recorder, HD-DVD, Blu-ray and A/V Receiver applications. The ABT1015 features Anchor Bay's proprietary 10-bit Precision Video Scaling™ engine that can independently scale an image horizontally and vertically to achieve an outstanding picture quality for Deep Color video displays up to 1080p resolutions.
Precision Video Scaler™
- 10-bit fully programmable horizontal and vertical scaler
- Up-scales to 1080p and downscales to as low as 480i/576i format
- AutoCUE-C™ Automatic Chroma Upsampling Error detection and correction
- Aspect ratio control for displaying 4:3 inputs in 16:9 displays — Includes non-linear stretch (panorama) mode
Picture Controls
- Brightness
- Contrast
- Saturation
- Sharpness (vertical and horizontal)
- Sub-pixel Y/C delay
- Output black level
- Dynamic Range Expansion and Compression
- 12-bit 3x3 Matrix for color correction
- xvYCC enhanced colorimetry
- All picture controls available in pass-through mode
Host Interface
- Two wire serial bus interface (I2C compatible)
Power
- 1.8V core and 3.3V I/O
Package
- 128-pin LQFP
Input
- 16/20/24-bit YCbCr (4:2:2)
- 8/10/12-bit YCbCr (4:2:2) - multiplexed YC mode
- 24/30/36-bit RGB/YCbCr (4:4:4)
- Embedded (BT.656) and separate sync support
- Video Formats: 480p, 576p, 720p, 1080i, 1080p
- 480i, 576i support for extremely low-cost applications
- Pass-through mode for all resolutions including 1080p
Output
- 24/30/36-bit RGB/YCbCr (4:4:4)
- 16/20/24-bit YCbCr (4:2:2)
- 8/10/12-bit YCbCr (4:2:2) - multiplexed YC mode
- Separate syncs with DE
- Embedded syncs (BT.656)
- Video Formats: 480i, 576i, 480p, 576p, 720p,1080i,1080p
- CEA-861D compliant timing and color space
- BT.601 for standard-definition outputs
- BT.709 for high-definition outputs
- Other resolutions are supported but may require an external PLL

Ordering Information
